Totalpond A16531L Manuel d'utilisateur télécharger pdf (Page 6)

4. Disassemble the pump and clean the internals of the pump. Fig. 15

Fig. 15

5. Reassemble the pump and filter box kit. Fig. 16

Fig. 16

CARE AND MAINTENANCE

• Regular cleaning of the pump may be necessary depending upon the environment in which it is

operated. Clean the pump when it is visibly soiled or when a drop in performance is detected.

• Before cleaning, always disconnect the pump from the power source.

• Remove all parts from the pump and clean in warm, soapy water.

• Disassemble the front cover and remove the impeller cover to expose the impeller assembly. Use

a soft cloth or brush to clean the impeller assembly and the inside of the impeller housing. Refer to

the diagram in the replacement parts list.

TROUBLESHOOTING

If the pump fails to operate:

• Check to make sure the power cord is plugged in and the pump is getting power.

• Check the pump outlet and any tubing, fountains, spitters etc. for kinks or obstructions.

• Remove the inlet screen and/or front cover, and impeller cover to expose the impeller. Turn the

impeller to ensure that it is not broken or jammed.

If the performance of the pump is not satisfactory or the pump does not flow evenly:

• Check to make sure the pump is completely submerged in water.

• Check to make sure the impeller and the impeller housing are clean.

1 2 3 4 5 6 7 8

Pas de commentaire

Totalpond A16531L Manuel d'utilisateur Page 6